Consumer TechLOT 261119 · 3 min read
Ledger confirms tampered wallets in Berlin as Dubai cases widen
Bitquery estimates $1.68 million stolen from 16 wallets tied to Berlin and Dubai. Ledger says suspect devices reached resale channels and urges owners to use fresh recovery phrases.
Key takeaways
- Bitquery estimated $1.68 million stolen from 16 wallets tied to Berlin and Dubai; Ledger has not confirmed the total.
- Ledger confirmed several tampered devices in Berlin and two suspected cases in Dubai on November 18, 2026.
- Two Dubai buyers reported about $604,000 in combined losses involving 1,300 SOL and 507,000 USDT.
- Bitquery’s earlier estimate was $102 million across 335 Southeast Asian wallets; Ledger has not confirmed it.
- Trezor confirmed malicious implants in three Safe 5 wallets distributed through CryptoBilis.

Tom Whitfield
Bitquery estimated on November 18, 2026, that approximately $1.68 million had been stolen from 16 cryptocurrency wallets linked to incidents in Berlin and Dubai, a total Ledger has not independently confirmed.
Ledger’s security update said investigators had identified several physically modified wallets in Berlin and were examining two suspected cases in Dubai. The disclosures extend an incident the company first revealed on October 15, when it described unauthorized hardware modifications to devices distributed through third-party resellers in Southeast Asia.
What did Ledger confirm in Berlin and Dubai?
Ledger also confirmed that a Nano Gen5, one of its newer hardware wallets, had been affected in Southeast Asia. This broadened the set of compromised models under review.
In the November 18 update, Ledger said investigators had found “no vulnerability in its secure chip or operating system.” The company likewise reported no confirmed cases involving wallets bought directly through its official website.
The new cases nevertheless show that physical alteration can occur before a secure product reaches a customer. In plain terms, the problem sits in the distribution chain rather than in the wallet’s stated defenses.
How did the tampering work, and how much was lost?
The tampered units were genuine Ledger wallets fitted with unauthorized electronic components before reaching retailers. Those components could capture sensitive recovery information while a customer initialized the device, giving attackers a path to the customer’s cryptocurrency without breaking the original security chip.
Two investors reported unauthorized transfers from their cryptocurrency accounts after buying Ledger devices from Virgin Megastore, an authorized retailer in Dubai. One reported losing approximately 1,300 SOL, equivalent to around $97,000; the other reported losing 507,000 USDT. Together, those two customers placed their reported losses at approximately $604,000.
Bitquery’s November 18 estimate of $1.68 million covered 16 wallets associated with Berlin and Dubai incidents. The analytics firm had previously estimated that the broader Southeast Asian campaign affected 335 wallets and caused approximately $102 million in cryptocurrency losses. Ledger has not independently confirmed either aggregate estimate, so both figures remain analyst assessments rather than verified company totals.
The mechanism matters because added circuitry can record a recovery secret even when the original secure chip remains intact. The reported thefts therefore do not, by themselves, demonstrate a software or secure-chip failure.
What should owners of suspect wallets do?
Ledger advised customers with devices bought through third-party sellers in Southeast Asia, in Berlin since January 2026, or in Dubai to contact its official support team. It also advised: “Customers who suspect their devices have been tampered with should avoid using them to create or restore cryptocurrency wallets.”
Customers who already initialized a suspect device should transfer assets to a new wallet using an entirely new recovery phrase. That phrase must come from a device purchased directly through Ledger’s official website.
Reusing an existing recovery phrase could leave funds exposed if the original phrase was captured during initialization. Ledger’s guidance therefore treats a new seed as safer than merely moving funds between wallets on the suspect unit.
For physical examinations, Ledger temporarily offers inspections that include X-rays at its manufacturing facility in Vierzon, France. The company is working with distributors and authorities to identify compromised units and determine how they entered legitimate retail channels. The practical takeaway is straightforward: owners should avoid initializing or restoring wallets on suspect units, create fresh recovery phrases on direct-purchase hardware, and seek an inspection.
Why does the distributor channel matter?
The Ledger findings follow Trezor’s confirmation that malicious hardware implants existed in three Safe 5 wallets distributed through Southeast Asian reseller CryptoBilis. Both cases involve genuine products altered before reaching customers, so buyers must assess the resale path as well as the device itself.
Ledger expects additional affected units to surface as its investigation continues. The parallel Trezor case means the retail-security problem now spans both manufacturers rather than remaining confined to one supply chain.
financefeeds.com (Source)
More from Tom Whitfield
Show full bio
Staff writer covering companies, deals and strategy in Semiconductors, chip manufacturing, hardware, AI compute at Chip Dispatch.
1,103 articles