
Phison X201P SSD hits 12 GB/s writes, but stumbles at QD1
Phison’s 15.36TB Pascari X201P delivered 12 GB/s writes and 600,000 random-write IOPS, but weaker QD1 and mixed-workload results limit its appeal for enterprise servers.
- By
- Tom Whitfield
- Filed
- Channel
- Memory & Storage
- Read
- 5 min read
By Tom Whitfield
Phison’s 15.36TB Pascari X201P delivered a steady 12 GB/s of sequential writes and more than 600,000 random-write IOPS in Tom’s Hardware testing, matching the published performance of this read-intensive PCIe 5.0 data-center SSD. The review found quick AI checkpoint saves, but weaker single-request writes and mixed workloads limit the appeal.
Contributing writer Shane Downing called the X201P “a very competent entry” for a company better known in consumer SSDs. His verdict says it “gives ground at low and moderate queue depths,” which matters for log commits and mixed read-write traffic.
What is the X201P designed for?
Phison introduced the X201P under NDA alongside the Supercomputing 2026 event. The drive belongs to the Performance X-Series, which targets intensive workloads where predictable performance matters, and it succeeds the X200P.
The X201P is read-intensive and rated for one drive write per day. It targets AI, analytics and database servers; the review tested a 4K 70/30 mix at higher queue depths. The mixed-use X201E carries the higher 3 DWPD rating.
The 15mm U.2 version covers 1.92TB, 3.84TB, 7.68TB, 15.36TB and 30.72TB. An E3.S version starts at 3.84TB, and both families offer single- and dual-port models.
Phison has defined the X201P as a high-queue-depth write drive, not a universal replacement for every enterprise SSD.
How fast was the 15.36TB sample?
The tested unit was a single-port U.2 ISE model, XP208H0815T3P3216T310, running firmware X2WM6026. Earlier data had reportedly used X2WM6025, but the reviewer confirmed X2WM6026 for every relevant result and mounted the drive upright through a PCIe 5.0 x4 U.2 adapter.
Phison rates the 15.36TB model for 14,800 MB/s sequential reads and 11,800 MB/s sequential writes. It delivered the cited 12 GB/s write rate and more than 600,000 random-write IOPS, and it passed the one-million-IOPS mark at QD128. It met every testable rated figure.
The rated random-read ceiling is 3.25 million IOPS. The interrupt-driven test could not reach it, but a polled test at Phison’s specified queue depth produced 3.283 million IOPS, confirming that the drive can exceed its published rating.
QD1 writes, log commits and the middle of the mixed-workload sweep lagged. The review still found tight write latency under load, while noting that the drive ran warm.
The X201P wins when storage must absorb large queues of writes, but loses ground when a server waits on a single small operation.
How do the capacities differ?
Phison publishes the following maximum performance figures for the U.2 range:
| Capacity | Sequential read (MB/s) | Sequential write (MB/s) | Random read (IOPS) | Random write (IOPS) |
|---|---|---|---|---|
| 1.92TB | 14,800 | 2,300 | 1.4 million | 75,000 |
| 3.84TB | 14,800 | 4,600 | 2.7 million | 230,000 |
| 7.68TB | 14,800 | 9,200 | 3.3 million | 480,000 |
| 15.36TB | 14,800 | 11,800 | 3.25 million | 600,000 |
| 30.72TB | 14,800 | 10,000 | 2.8 million | 490,000 |
All five capacities use the Phison X2 controller, PCIe 5.0 x4 and NVMe 2.0d, and include DRAM of unpublished size. Their flash is 3D TLC; the 15.36TB listing alone specifies 321-layer 3D TLC.
Every capacity includes power-loss protection and a five-year warranty. Active power is capped at 25W and idle power at 5W. The specification table lists pricing as not available, while ISE and SED security options use TCG Opal 2.02.
Procurement part numbers differ by security configuration:
| Capacity | ISE part number | SED part number |
|---|---|---|
| 1.92TB | XP208H081T92P322T0410 | XP208H081T92P222T0410 |
| 3.84TB | XP208H083T84P324T0910 | XP208H083T84P224T0910 |
| 7.68TB | XP208H087T68P328T1910 | XP208H087T68P228T1910 |
| 15.36TB | XP208H0815T3P3216T310 | XP208H0815T3P2216T310 |
| 30.72TB | XP208H0830T7P3232T710 | XP208H0830T7P2232T710 |
Phison’s own numbers put peak write performance at 15.36TB, while the 30.72TB model trades write speed for twice the capacity.
What hardware drives the result?
Phison did not provide firm hardware details, so some component identification remains informed inference. It claimed 321-layer flash; the reviewer judged it likely to be SK hynix V9 TLC, a three-deck design not previously tested in a product. The reviewer considered that flash exceptionally fast and a possible contributor to the measured performance.
The X2 controller has 16 flash channels. The review said the doubled channel count enabled stronger performance from TLC, while the design does not rely on pSLC.
The controller combines standard Arm Cortex-R5 main cores with AndesCore RISC-V coprocessors, based on information gathered rather than firm disclosure. Phison’s newer E28 design uses a 6nm process with Andes N45 and N25F cores, while the 12nm X2 appears to use N25F-class coprocessors.
Marvell’s Bravera SC5 and Silicon Motion’s SM8366 use Arm cores throughout. The X201P’s case therefore rests on channel parallelism, mixed-core control and unusually fast TLC flash.
The X2’s advantage comes from parallel TLC access and fast flash, not a newer process node.
What does the X201P offer for fleet management?
For fleet deployment, Phison specifies NVMe 2.0d, OCP Datacenter NVMe SSD v2.0 with v2.6 telemetry, and out-of-band NVMe-MI 1.2 management over SMBus and PCIe. The host link is PCIe 5.0 x4; Phison offers a single-port configuration and 2x2 dual-port models.
- Security and data protection: ISE, SED with TCG Opal 2.02, or non-SED; AES-XTS 256-bit encryption; end-to-end data protection; power-loss protection; cryptographic erase and block erase.
- Formats and management: 512-byte and 4,096-byte LBA formats, each with optional metadata; up to 128 namespaces; seven firmware slots with activation without reset.
- Power and thermal controls: Six power states have maximum ratings of 25W, 22W, 20W, 18W, 15W and 12W. Warning and critical temperatures are 77°C and 85°C, and the drive supports host-controlled thermal management.
Flexible Data Placement is not supported. The tested firmware is X2WM6026.
The next commercial question is pricing: Phison lists no prices, so its high-queue-depth write advantage and 1.92TB-to-30.72TB capacity range still need to outweigh the X201P’s weaker QD1 and mixed-workload performance.
Original: forums.tomshardware.com
More from Tom Whitfield
Show full bio
Staff writer covering companies, deals and strategy in Semiconductors, chip manufacturing, hardware, AI compute at Chip Dispatch.
1,026 articles
Related articles
tom-s-hardware-builds-a-bench-that-shows-ssds-on-their-worst-day
Tom's Hardware Builds a Bench That Shows SSDs on Their Worst Day
xinnor-ships-xinas-3-13-previews-ai-assisted-management-via-mcp-a19c453a
Xinnor Ships xiNAS 3.13, Previews AI-Assisted Management via MCP
dapustor-s-j5060-pairs-qlc-density-with-an-8s-pslc-cache-422e38df
DapuStor's J5060 Pairs QLC Density With an 8μs pSLC Cache
biwin-m560-2tb-review-dram-less-pcie-5-0-ssd-rated-at-1-7m-iops
Biwin M560 2TB Review: DRAM-less PCIe 5.0 SSD Rated at 1.7M IOPS



