Hardware & ComponentsLOT 261122 · 4 min read

Lattice Mach-N2 Board Brings 220K Logic Cells to Low-Power FPGA Kits

Lattice's Mach-N2 board ships 220,000 logic cells with post-quantum security, leading five low-power FPGA kits from $169 that target secure boot, edge AI and sensor interfacing.

By Tom Whitfield824 words

Key takeaways

  1. Lattice introduced the Mach-N2 (LN2-MH-20-EVN) evaluation board in September 2026 with 220,000 system logic cells and PCIe Gen4 x4.
  2. Terasic's DE23-Lite kit costs $169 and runs an Altera Agilex 3 with 135,110 logic elements.
  3. AMD's Spartan UltraScale+ SCU35 Evaluation Kit costs $229 with a 36,000-logic-cell SU35P FPGA and up to 304 I/O.
  4. The MachXO4 RoT board boots in under 5 ms; the Mach-N2 boots in under 30 ms from integrated flash.
  5. The CrossLinkU-NX SoM kit includes 64 Mb HyperRAM and a four-lane MIPI CSI-2 receiver for edge vision.
5 of the Lowest-Power FPGA Dev Kits Available Today
5 of the Lowest-Power FPGA Dev Kits Available Today — Anne Nygård / unsplash

Lattice's Mach-N2 evaluation board (LN2-MH-20-EVN), introduced in September 2026, packs 220,000 system logic cells into a kit aimed at low-power, secure control applications — the highest logic density among five current low-power FPGA development boards now on the market. The board line-up, which spans Lattice, Terasic and AMD hardware, targets engineers prototyping embedded and industrial designs where power, security and I/O expansion matter more than raw throughput.

What does the Mach-N2 board offer?

The Mach-N2 board pairs its 220,000 system logic cells with 12 Mb of embedded memory, LPDDR4 memory and integrated flash. Connectivity includes four lanes of PCIe Gen4, two FMC expansion connectors (one HPC, one LPC), a Raspberry Pi MIPI camera connector and 1G Ethernet. The I/O count runs to 94 wide-range pins plus 153 high-speed differential pins.

Security is the board's differentiator. It implements PUF-based security, user run-time security and CNSA 2.0-compliant post-quantum cryptography with crypto agility on the root-of-trust device. The integrated non-volatile flash protects the FPGA configuration and enables single-chip boot in under 30 ms. Lattice positions the board for secure network infrastructure, always-on system control and high-speed data interfaces, programmed through Lattice Radiant software.

In short, the Mach-N2 kit pushes post-quantum security and Gen4 connectivity into a low-power prototyping platform.

Which board handles root-of-truth and secure boot?

Lattice's MachXO4 RoT Development Board serves engineers prototyping hardware management and security applications around the MachXO4 RoT FPGA. The device carries a hardened cryptographic engine for secure boot and platform-security designs, along with 16 Mb of SPI flash with quad-read support for external storage and up to 2,693 kb of user flash memory when dual-boot is disabled.

The FPGA boots in under 5 ms, which Lattice describes as instant-on operation. Expansion arrives through Raspberry Pi, Arduino, Versa, FX12 and Aardvark headers, and the FPGA offers up to 381 I/O pins in a 484-ball caBGA package. A USB-B port handles programming and I2C communication. The board suits secure boot, hardware management and low-power industrial control.

The takeaway: this kit exists to prototype trust itself — the boot path that other boards depend on.

How does Lattice approach edge AI?

The CrossLinkU-NX SoM Development Kit prototypes low-power edge AI and embedded vision. Built on the CrossLinkU-NX FPGA, the system-on-module supports always-on operation for power efficiency and offers a four-lane MIPI CSI-2 receiver with Soft D-PHY, fed through a 22-pin Raspberry Pi camera connector.

Memory includes 64 Mb of HyperRAM and 512 Mb of SPI flash. USB Type-C handles connectivity through USB aggregation. Pairing the kit with a carrier card connects a Raspberry Pi CM5 to the SoM, adding 1G Ethernet, microSD storage, GPIO and USB 3.1 host capability; both modules include debug connections. Target uses are camera interfaces, edge AI and embedded vision.

The module approach means vision designers can swap compute and connectivity without redesigning the sensor path.

What does $169 buy from Terasic?

Terasic's DE23-Lite Development Kit, priced at $169, runs an Altera Agilex 3 A3CZ135BB18AE75 FPGA with 135,110 logic elements. The board includes 64 MB of SDRAM, 89 Mb of M20K and 1.4 Mb of MLAB embedded memory, and 368 18x19 hardware multipliers. Configuration sits in 128 Mb of QSPI flash.

An integrated ADC, GPIO expansion headers and HDMI output with audio round out the platform, alongside 10 LEDs, 10 slide switches, four pushbuttons and six seven-segment displays. USB Type-C supports programming through USB Blaster III. Terasic lists robotics, digital logic prototyping, video processing and power-efficient embedded vision among the use cases.

At its price, the DE23-Lite is the entry ticket for Agilex 3 experimentation.

What does AMD's $229 kit cover?

AMD's Spartan UltraScale+ SCU35 Evaluation Kit, at $229, develops FPGA-based sensor interfaces and board-management systems on the SU35P FPGA with 36,000 logic cells. Expansion dominates the design: four Pmod connectors, two MikroE Click ports, an Arduino Shield interface, two Raspberry Pi HAT interfaces and one SYZYGY high-speed I/O connector, with up to 304 total I/O.

The kit carries 64 Mb of HyperRAM, 1.93 Mb of on-chip memory, 10/100 Ethernet through an RJ-45 connector, power-monitoring devices and hardware security features. AMD Vivado and Vitis tools support the platform, which targets I/O expansion and management for medical, industrial and data center equipment.

For sensor-heavy prototypes, the SCU35's expansion surface — not its logic count — is the selling point.

Across the five boards, the pattern is consistent: vendors are competing on security features, boot times and ecosystem connectors rather than logic density alone, with prices from $169 to $229 marking the low-power segment's mainstream.

latticesemi.com (Original)

Filed under

Share this article:

More from Tom Whitfield

Tom Whitfield

Show full bio

Staff writer covering companies, deals and strategy in Semiconductors, chip manufacturing, hardware, AI compute at Chip Dispatch.

1,200 articles

Read also

« Previous article