Hardware & ComponentsLOT 261122 · 2 min read
Open-source Wi-Fi NAS reads 3.5-inch floppies without a PC
BigCrimping's floppy3.5 is an open-source portable Wi-Fi NAS built on an RP2354A and ESP32-S3 that archives 3.5-inch floppies — including Sony Mavica camera disks — with no PC needed.
Key takeaways
- floppy3.5 is a fully open-source portable Wi-Fi NAS for reading 3.5-inch floppies, with all design files on GitHub
- The custom PCB pairs an RP2354A microcontroller with an ESP32-S3 bridge, plus a slimline floppy drive, battery and microSD slot
- It uses the Greaseweazle protocol for direct drive-signal control, enabling imaging regardless of disk format; FAT12 is supported by default
- Targets media from Sony Mavica and Panasonic PV-SD cameras that stored photos on PC-format 3.5-inch floppies
A hardware hacker going by BigCrimping has released floppy3.5, a fully open-source portable Wi-Fi NAS that reads and copies 3.5-inch floppy disks over a network — no computer required at the point of capture.
The project targets a very real backlog of media. Beyond the usual boxes of disks in attics, a whole generation of early digital cameras — the Sony Mavica and Panasonic PV-SD families chief among them — stored photos on bog-standard PC-format 3.5-inch floppies. Owners of those cameras, or anyone sitting on a stash of 1990s disks, can walk a storeroom inserting floppies one after another while the device handles the archiving.
What's inside the box?
Crimp published everything on GitHub: 3D-printable enclosure files and a custom PCB. The board carries an RP2354A microcontroller and an ESP32-S3 bridge. The rest of the bill of materials is short:
- a slimline floppy drive
- a battery
- a Wi-Fi module
- a microSD slot
- a monochrome LCD display
That LCD earns its place. It shows sector and cylinder counts, a good/bad sector map, file counts, and even a firmware update progress counter. The buttons do exactly what their labels say: READ scans the files, SAVE dumps them to the SD card, DISP returns to the home screen, and POWER toggles the device.
Why Greaseweazle instead of a controller?
The design's sharpest choice is software, not silicon. Instead of a conventional floppy drive controller, floppy3.5 speaks the Greaseweazle floppy drive communications protocol. Because Greaseweazle drives a floppy drive's wire signals directly, the approach saves on hardware and grants full control over the drive — easy imaging and direct data manipulation regardless of a disk's underlying format.
That format-agnostic layering matters. By default, the device understands FAT12, the filesystem that floppies from the Mavica era typically carry. For anything odder, a USB cable connects the device directly to a host so you can run the full Greaseweazle utilities and fetch entire disk images, format quirks and all.
How do you get the data off?
Two paths. The microSD card optionally stores each disk's files locally, which is what enables the walk-around-the-attic workflow. Alternatively, the device exposes a web interface over the network for managing content — that's the NAS half of the name, and the reason a box of floppies can become a shareable archive without ever touching a desktop machine.
For now, the project lives where its creator left it: on GitHub, with every design file public. Anyone with a 3D printer, a soldering iron and a stack of old disks can build one, and the Greaseweazle foundation means future firmware could reach formats well beyond FAT12.
Tom's Hardware (Source)
More from Rebecca Stone
Show full bio
Correspondent covering technology and product news in Semiconductors, chip manufacturing, hardware, AI compute at Chip Dispatch.
1,245 articles