Hardware & ComponentsLOT 261119 · 3 min read
Co-Packaged Optics Hit a Fiber Problem: No Standard Connector Exists
CPO and NPO need fiber attached directly to packages, but pigtails, snap-on clips and magnetic connectors all compete with no standard in sight. Senko demonstrated 10,000 mating cycles.
Key takeaways
- Senko and Advantest demonstrated a tungsten-carbide test connector surviving 10,000 matings with minimal insertion-loss variation.
- Fiber cladding measures 125 µm around a 10 µm core, consuming scarce die-edge shoreline — 16 cables eat large real estate.
- A Meta study showed 10,000 hours of constant CPO operation without signal-integrity degradation.
- No standardized detachable fiber connector exists; V-groove attachment dominates today but allows no rework.

Ten thousand matings with almost no variation in insertion loss. That's the number Senko says it demonstrated with a tungsten-carbide test connector built with Advantest — one of the strongest data points in an industry that still has no standard way to attach an optical fiber to a chip package.
As photonics shifts from pluggable transceivers toward near-packaged optics (NPO) and co-packaged optics (CPO), engineers are inventing new fiber attachments from scratch. Several bespoke designs exist. None share a common interface, and standardization hasn't even begun.
Why fiber must move inside the box
Today, lasers and connections sit at the server faceplate, so every signal travels electrically across the board — SerDes-driven serial lines burning high power over long copper. CPO eliminates those lines by bringing fiber into the processor or switch package.
"CPO unlocks the token economics that everyone cares about," said Vishal Chandrasekhar, director of product management at Ayar Labs. "The way you make 5× or 10× kinds of improvements is by having new hardware."
Yoshimasa Bando, principal scientist at Mitsubishi Chemical, framed the driver plainly: "With the rapid growth of generative AI, AI data centers are required to process enormous volumes of data faster and more efficiently than ever before."
Lasers stay on the faceplate for now. "The laser is the highest reliability risk," Chandrasekhar said. CPO inherits every advanced-packaging challenge, plus fiber coupling, noted David Harame, COO of AIM Photonics, which operates with NY Creates.
Unknown fiber length
Chipmakers can't know how long an attached fiber should be. Lightmatter CEO Nick Harris described the workaround: excess fiber goes into a management tray with spool points, "neatly managed for airflow." Senko's Obie Roy said integrators can cut to length and terminate later. University of Toronto professor Amr Helmy called it a non-issue: "The fiber length is irrelevant." Connectorize it, cut it, or fuse it.
Moving beyond V-grooves and the shoreline problem
Today's V-groove edge coupling works at low volume but fibers are permanently attached. "If one of them breaks, there's no rework," said Gerard John, senior director at Amkor. "People are generally thinking in terms of detachables."
Space is the constraint. A fiber core is 10 µm, but cladding makes it 125 µm. Sixteen cables, even staggered, eat serious die-edge shoreline. Three exits exist: reflect light up 90° then out horizontally; butt a connector against the die edge; or route vertically to the chip's top surface, freeing the entire die area. Intel Foundry fellow Ravi Mahajan flagged the vertical trade-off: "You may get in the way of your thermal solution."
The problem with pigtails
Pigtails can be rugged — Intel baked, cycled and "banged it on the desk to convince a VP that it doesn't come off," Mahajan said. But a chip wrapped in dangling fibers defeats trays and pick-and-place automation. "You probably won't have many parts on the tray," John said. Synopsys' Sanjay Gangadhara noted pigtails remain common because teams make incremental changes. STL CTO Badri Gomatam added the manufacturing bar: hundreds of connections, no dust, surviving reflow — "low cost, high yield, and repeatable."
Alignment, magnets and serviceability
Active alignment is a slow six-degree-of-freedom process. Lenses over optical TSVs can correct some misalignment, and micro-optics are spreading. Senko's snap-on connector uses passive fine alignment plus screws for mechanical latching. Magnetic connectors, Apple-style, are under study — but field strength near MRAM worries engineers like John.
Serviceability drives detachability. "If the fiber breaks, you have to fail the entire module out, which is very expensive," Roy said. Meta published a study last year showing 10,000 hours of constant CPO usage with no signal degradation, per Gangadhara.
Standardization — or at least multi-source agreements — remains the open gate, and Roy's vision of a common receptacle licensed on RAND terms may be the path that finally removes photonics' biggest volume barrier.
i0.wp.com (Original)
More from Rebecca Stone
Show full bio
Correspondent covering technology and product news in Semiconductors, chip manufacturing, hardware, AI compute at Chip Dispatch.
1,170 articles