SemiconductorsLOT 261120 · 4 min read

Infineon Cuts MOSFET Losses Up to 35% for 800-V AI Server Power

Infineon's OptiMOS 7 40 V trench MOSFETs cut RDS(on) up to 33% and charge figures of merit up to 35%, targeting AI server power stages in both 48-V and emerging 800-V DC racks.

By Nathan Brooks713 words

Key takeaways

  1. OptiMOS 7 40 V cuts maximum RDS(on) by up to 33% versus OptiMOS 6 at 4.5 V gate-source
  2. Output charge and gate charge figures of merit each fall by up to 35%
  3. Series supports switching above 1 MHz and junction temperatures up to 175°C
  4. Five parts span 3.3 mm² source-down PQFN and 5-× 6-mm dual-side-cooled drain-down packages
  5. Devices serve secondary-side IBC stages in both 48-V and emerging 800-V DC architectures
40-V MOSFETs Help with High-Frequency DC-DC Power Conversion
40-V MOSFETs Help with High-Frequency DC-DC Power Conversion — RemazteredStudio / pixabay

Infineon says its new OptiMOS 7 40 V MOSFETs cut on-state resistance by up to 33% and figures of merit for output and gate charge by up to 35% against the previous generation. The target is the hottest real estate in electronics: the interior of an AI server. The series, introduced as a switching-optimized family of 40-V trench power MOSFETs, addresses high-frequency DC-DC conversion in AI servers, data centers and telecom infrastructure, with switching frequencies above 1 MHz supported in suitable topologies.

Richard Kuncic, head of Infineon's power switches business line, put the design problem plainly. "With the OptiMOS 7 40 V, we give designers a MOSFET that cuts conduction and switching losses at the same time, so they can raise power density in the very limited space of an AI server," he said. The part spans two worlds: "It fits the secondary side of emerging 800-V DC architectures as well as today's 48-V designs, which lets our customers move to the next architecture at their own pace."

That dual fit matters commercially. Data center operators are debating the shift from 48-V rails toward 800-V DC distribution to feed racks that no longer behave like servers and more like small substations. Infineon is not asking customers to pick a side. The devices serve the low-voltage, secondary-side stages of intermediate bus converters (IBCs) in both the emerging 800-V DC architecture and the traditional 48-V setup. A component that works in both buys flexibility.

How does Infineon reduce the losses?

The trench MOSFETs trade off three parameters rather than optimizing one: on-state resistance (RDS(on)), output charge (Qoss) and gate charge (Qg). Cutting conduction losses usually worsens switching losses, and vice versa. Infineon claims progress on both fronts at once.

The comparison with OptiMOS 6 uses source-down devices measured at a gate-source voltage of 4.5 V. Maximum RDS(on) falls by up to 33%. The figures of merit for output charge and gate charge each drop by up to 35%, according to the company. The series is optimized for 5-V gate drive and rated for junction temperatures up to 175°C — a rating that reflects the thermal reality inside modern AI racks rather than laboratory optimism.

What packages and part numbers are available?

The lineup splits by package and by how the heat gets out. Two parts, the IQE010N04LM7CG and IQE010N04LM7CGSC, come in PQFN source-down center-gate packages measuring 3.3 mm². Both carry a maximum RDS(on) of 1.0 mΩ at a gate-source voltage of 10 V.

The other three take a different thermal approach:

  • ISCH65N04LM7SC — maximum RDS(on) of 0.65 mΩ at 10 V gate-source
  • ISCH69N04LM7SC — maximum RDS(on) of 0.69 mΩ at 10 V gate-source
  • ISC011N04LM7SC — maximum RDS(on) of 1.1 mΩ at 10 V gate-source

These three ship in PQFN 5- × 6-mm drain-down packages with dual-side cooling. The stated reason is the increasingly hot conditions inside AI servers, where single-sided cooling no longer suffices. When every watt removed from a MOSFET is a watt the rack does not have to spend on fans, package thermodynamics become a competitive weapon.

Why does this matter beyond the datasheet?

The economics of AI infrastructure have shifted pressure onto the power chain. GPU and accelerator racks draw power that was once the domain of entire rows of cabinets, and the intermediate bus converters stepping voltage down to the point of load sit in the tightest, warmest spaces in the system. Efficiency gains measured in fractions of a percentage point compound across thousands of servers into meaningful operating-cost reductions.

Infineon's positioning also reveals a bet on timing. The company pairs the parts with both 48-V and 800-V DC architectures because the industry has not settled the migration question yet. By covering the secondary side of both, Infineon lets power-supply designers qualify one silicon platform while their customers decide when — or whether — to make the 800-V jump. The 175°C rating and dual-side cooling indicate where Infineon expects the market to go: hotter, denser, and less forgiving of parts that only win on a single datasheet parameter.

infineon.com (Original)

Filed under

Share this article:

More from Nathan Brooks

Nathan Brooks

Show full bio

Senior reporter covering people, launches and day-to-day practice in Semiconductors, chip manufacturing, hardware, AI compute at Chip Dispatch.

1,135 articles

Read also

« Previous article