Enthusiast builds a working 486 DX2 retro PC on a breadboard in just 16 days, immediately runs Doom

Hardware & Components

Tokyo Engineer Builds Working 66 MHz 486 DX2 PC on Breadboard in 16 Days

A Tokyo app engineer wired an Intel i486 DX2-66 into a breadboard PC with an FPGA chipset, booted FreeDOS 1.3, and ran Doom on a 3D-printed CRT-style monitor — all in 16 days.

By
Grace Kim
Filed
Channel
Hardware & Components
Read
3 min read

A Tokyo-based app engineer built a fully working PC around an Intel i486 DX2-66 CPU on a breadboard in 16 days and ran Doom on it. The builder, who posts as @nagakurage, first showed the vintage CPU on October 24 and published a Doom gameplay video on November 9.

The chip at the heart of the project is the i486 DX2 66, a gray, made-in-Malaysia part that runs at 66 MHz internally and 33 MHz externally through a 2x clock multiplier. The package carries 168 pins, which look thick by modern standards. Every pin was wired individually to an experimental socket built on a baseboard.

The engineer paired the CPU with a Colorlight i9 v7.2 FPGA board, which handled chipset duties for the homemade system. The build log, tracked through posts on X, shows a rapid sequence of milestones.

How the build came together

  • October 24: @nagakurage acquired and showed the i486 DX2 66 CPU.
  • October 26: The finished breadboard form took shape, and the CPU blinked an LED using x86 code.
  • October 31: RAM was added and tuned to run error-free.
  • November 3: MicroSD storage joined the system, and the machine booted FreeDOS 1.3 for the first time.
  • November 9: The complete system powered up with its custom monitor and ran Doom.

The i486 DX2 line, launched by Intel in the early 1990s, doubled the internal clock of the 486 while keeping the external bus at 33 MHz. The DX2 66 was among the fastest parts of its generation and remains sought after by collectors.

What did the custom display add?

The engineer did not stop at the breadboard. Using a Bambu Lab A1 mini 3D printer, he produced the parts for a CRT-style enclosure with a deliberately thick bezel, matching the look of early-1990s monitors. The case design came from Claude, the AI assistant.

Inside sits a 5-inch Elecrow Raspberry Pi panel with an 800×480 resolution. The beige-shelled result completed the period-correct aesthetic. Paired with the breadboard PC, the setup evoked a genuine early-90s workstation, wires notwithstanding.

Doom, released in 1993, ran smoothly on the 1992-era silicon, as expected for a title of that vintage on this class of hardware. The game remains the standard demonstration for restored and homemade retro PCs.

What comes next for the project?

The engineer plans to refine the breadboard design and make it fully compatible with PC-98, the NEC PC-9800 platform that dominated the Japanese market in the early 1990s. That goal would require emulating the architecture's distinct hardware conventions, which differed from Western IBM-compatible PCs in graphics, memory mapping and keyboard layout.

The project follows a pattern among retro computing enthusiasts. In April, another hobbyist completed a breadboard-based Intel 386 system, showing sustained interest in rebuilding classic x86 platforms from discrete components.

Such builds strip a PC down to its essentials: a CPU, an FPGA acting as chipset, RAM, storage and a display. They demonstrate that a 486-class machine needs remarkably few parts to function, provided the builder can wire 168 pins correctly and write the supporting logic. The next milestone, full PC-98 compatibility, would make the machine authentic to the Japan of its era rather than merely functional.

Source: Tom's Hardware

Share this article:

More from Grace Kim

Grace Kim

Show full bio

Market editor covering people, launches and day-to-day practice in Semiconductors, chip manufacturing, hardware, AI compute at Chip Dispatch.

991 articles

Related articles

« Previous article